🏷️ Name Plate Generator

A single-file, in-browser parametric generator for 3D-printable name plates, keychains, and pet tags. Built with three.js — no install, no build step, everything runs client-side.

Multi-line text with independent per-line sizing and line spacing
A wide range of fonts: sans-serif, script/handwriting, bubble/bold
Rounded, Rectangle, Oval, or Contour (outline hugs the letters) base plates
Mounting holes or a keychain loop, beveled edges, top/bottom border text
One-click style presets to get started fast
STL export: one combined file, or body + text as two files for multi-color (AMS/MMU) printing

Open source, MIT licensed.
View the code on GitHub →

🏷️ Name Plate Generator

Design a parametric name plate, keychain, or pet tag and export it ready to print — right in your browser, no install.

STYLE PRESETS

TEXT

Text style ?Emboss: text raised on top of the plate, its own color. Engrave: text recessed into the plate as a pocket, single material. Die Cut: text cut all the way through the plate as open holes.

Content (one line per row)

Typeface

Custom Google Font (advanced) ?Type the exact name of any font from Google Fonts and it loads live — not just the ones in the dropdown above. Browse names at the link below, then paste one in here.

Browse fonts on fonts.google.com →

Text height

12 mm

Text depth (raised height)

1.2 mm

Line spacing ?Vertical gap between lines, as a percentage of the normal spacing. Only matters with 2+ lines of text.

100%

Letter spacing ?Extra horizontal gap inserted between every pair of characters, in mm. Negative values tighten the text.

0 mm

Center horizontally

Center vertically

BORDER TEXT

Top line (optional)

Bottom line (optional)

Border text height

4 mm

Border text depth (raised height)

1.2 mm

Not available in Contour mode - that shape is fully defined by the main text.

BASE PLATE

Shape

Auto-fit plate to text ?Plate width/height are computed from the text automatically. Turn off to set exact dimensions below instead.

Keep letters connected (bridge separated parts) ?Letters/words that would end up as separate floating pieces (e.g. an "i" or a dot) get linked with thin bridges so the plate prints as one piece.

Padding around text

10 mm

Corner radius

6 mm

Plate thickness

3 mm

Beveled edges (plate + text) ?Chamfers the outer edges of the plate and text instead of leaving them sharp square-cut — softer look, and no supports needed for the top edge.

Computed size— × — mm

MOUNTING HOLES

Layout

KEYRING LOOP

Add a loop + hole, keychain-style

PREVIEW COLORS

Plate

Text

For AMS/multi-color: import both files into your slicer in the same step (don't auto-arrange), then assign a separate filament to each — they share the same origin so they'll line up automatically.

drag to orbit · scroll to zoom

v1.6

loading fonts…